beautypg.com

SoundMax SM-CMD2039 User Manual

Page 7

background image

7

1. Select a position in which the screw holes of the brackets (3) are aligned

with the screw holes in the unit body, and screw in two screws (2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

Note: The outer trim frame and mounting sleeve are not used for method of

installation.

Detachable control panel

To take off the panel

Press OPEN button on the panel. The panel will detach. Pull the panel towards yourself to take it off.

To attach the panel

Hold the panel with its front directed to yourself. Install the left part of the panel into the bracket of the

unit body.

Press the right part of the panel until a click.

Caution:

The control panel can easily be damaged by shocks. After removing it, place it in the protective case and be

careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the

control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails,

pens, screwdrivers, etc.

If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in

isopropyl alcohol to clean the socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in the included protective case when not in used and carried away

when you leave the vehicle to deter theft. Switch off the power of the unit. Detach the front panel, then put

it to the protective case and take it with you.