SoundMax SM-CMD2039 User Manual
Page 18
18
uto memory store: press and hold APS button on the panel or AMS/RPT bu
uto store mode. The radio will automatically store 6 strongest available stations to the 6
ies of the current band. To stop auto store, press this button again.
Stereo/Mono mode
Press ST/PROG button on the RC to select ST ON (stereo) or ST OFF (mono). Or press repeatedly SEL
button until ST ON/OFF is selected, then rotate VOL knob or press VOL+/- buttons on the RC to select ST
ON or ST OFF.
Local/Distant reception
Press LOC/RDM button on the RC to select LOC ON or LOC OFF mode.
Or press repeatedly SEL button until LOC ON/OFF is selected, then rotate VOL knob or press VOL+/- buttons
on the RC to select LOC ON or LOC OFF mode.
Local and distance reception setting can facilitate the radio reception, depending on the location in which the
radio is being used.
AF (Alternative Frequencies) function
Press AF button on the panel to turn the AF function on or off. When on, the AF icon will be displayed.
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search
another station with the same PI (Program Identification) as the current station but with stronger signal
strength.
PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode. Default setting is ON.
TA (Traffic Alarm) function
Press TA button on the panel to turn TA function on or off.
In TA mode traffic program will be automatically searched, until the program is received.
When traffic announcement is received the unit will temporarily switch to the tuner mode (regardless of the
current mode) and begin broadcasting the announcement. After the traffic announcement is over, it will
return to the previous mode and volume level.