SoundMax SM-CMD2039 User Manual
Page 23
23
g the SD/MMC card/USB device
MC/SD card or USB device into MMC/SD compartment or USB slot correspondin
mode of the unit will be changed to MMC/SD or USB mode automatically. The first car
rack playback will start.
Note: When an MMC/SD card and a USB device are both inserted into their compartment or slot, the
playing mode will be changed into the mode of the later one.
Playing/pausing
When a disc is loaded, press PLAY/PAUSE button on the RC to start playback. To ensure good system
performance, wait until the unit finishes reading the disc information before proceeding. Press and hold
SET/PAU button on the panel or press shortly PLAY/PAUSE on the RC to pause the playback. Press again
to resume the playback.
During MP3/WMA/CDDA playback the screen of the external connected device will display the playback
interface showing the track name, elapsed/remaining time etc. Press 5/STOP button on the front panel
or press STOP/REVERSE on the RC to stop playback. The screen will show the disc contents menu
enabling you to select a file for playback by pressing cursor buttons.
Stop playback
During playback press STOP button on the panel or STOP/REVERSE button on the RC to stop playback.
Playing the previous/next track
During playback press SEEK-/PREVIOUS button on the RC or turn UP/DOWN knob to the left to play the
previous track.
Press SEEK+/NEXT button on the RC or turn UP/DOWN knob to the right to play the next track.
Scanning forward and backward
Press and hold SEEK-/PREVIOUS and SEEK+/NEXT buttons on the RC or turn and hold UP/DOWN knob to the
left or right to fast the playing in backward or forward direction. Release the button when the desired location
is found.