beautypg.com

Gen eral operations – SoundMax SM-CMD2039 User Manual

Page 15

background image

15

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN

button and remove the panel, then press the RESET button to restore the unit to the original factory

settings.

Power button

Press any button (except OPEN button) to turn the unit on. Press POWER button to switch the unit off.

Note: After the unit is off, the clock, volume level and radio current settings will be memorized, and when

you turn the unit on it will resume the stored status you set.

Volume adjustment

Rotate VOL knob on the panel clockwise or press VOL+ button on the RC to increase the volume level;

rotate VOL knob anticlockwise or press VOL- button on the RC to decrease the volume level.

Mode selecting

Press MODE button repeatedly to select a mode: RADIO => DISC (if a disc is inserted) => USB (if a USB is

inserted) => CARD (if an SD/MMC card is inserted).

Subwoofer control

Press and hold the BAND/NP/SUB button on the panel to turn the Subwoofer output on. An external

amplifier is required to operate a subwoofer.

Mute function

Press MUTE button to cancel the sound. Press again to resume.

Sound settings

Press SEL button repeatedly to select a parameter: VOL => BAS => TRE => BAL => FAD => LOUD =>

LOC => ST => EQ. Rotate VOL knob or press VOL +/- buttons on the RC to adjust each parameter.

VOLUME: 00, 02,......, 38, 39

BASS: -7, -6,......, 0, +1, +2,......+6, +7