SoundMax SM-CMD2039 - Manual (Page 17)

17
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
Band select
Press BAND/NP/SUB button on the front panel or BND/SYS button on RC repeatedly to select your desired
radio band in RADIO mode: FM1, FM2, FM3, AM1 (MW1), AM2 (MW2).
Auto/Manual tuning
Automatic tuning: Press and hold for 2 seconds SEEK-/PREVIOUS and SEEK+/NEXT buttons on the RC
or turn and hold UP/DOWN knob to the left or right, the automatic search will start. It will play when
finds the station. Repeat the operation to seek for the following station.
Manual tuning: Press briefly SEEK-/PREVIOUS and SEEK+/NEXT buttons on the RC or turn UP/DOWN
knob on the panel to the left or right to select a station downward or upward step by step.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM).
To store a station:
Select a band.
Select a station with SEEK-/PREVIOUS and SEEK+/NEXT buttons on the RC or UP/DOWN knob on the
panel.
Hold a preset button (1-6), under which you want store the station.
To recall a station:
Select a band.
Press a preset button (1-6) briefly to recall the stored station.
APS (Auto memory store/Preset scan) function
Preset scan: press APS button on the panel or AMS/RPT button on the RC to scan all preset stations in
the memory of the current band and stay on each memory stations for several seconds. To stop preset
scan, press this button again. To listen to saved station press 1-6 buttons.