3DLABS Oxygen VX1 - Manual (Page 43)

Declaration of Conformity
We, 3Dlabs, Incorporated,
480 Potrero Avenue
Sunnyvale, CA 94086
Phone 408-530-4700
Fax 408-530-4701
United States of America
declare under our sole responsibility that the products
3Dlabs ® Oxygen ™ VX1
3Dlabs Oxygen GVX1
to which this declaration relates are in conformance with the following standards:
EN 55024:1998, clause 4.2.1
EN 55024:1998, clause 4.2.2
EN 55024:1998, clause 4.2.3
EN 55024:1998, clause 4.2.3.2
EN 55024:1998, clause 4.2.6
EN 55022:1994, clause 5
EN 55022:1994, clause 6
IEC950:1991, 2nd Edition
EN60950:1992
following the provisions of the 89/336/EEC Directive.
San Jose, California, May 14, 1999
3Dlabs, Inc.
W ARNING : Any use of, installation practices, modifications or maintenance procedures
carried out which are not in accordance with the issued “instructions for use” or
approved by 3Dlabs Inc. will nullify the CE certification of this product and could
lead to prosecution.
We, 3Dlabs, Incorporated,
480 Potrero Avenue
Sunnyvale, CA 94086
Phone 408-530-4700
Fax 408-530-4701
United States of America
declare under our sole responsibility that the products
3Dlabs ® Oxygen ™ VX1
3Dlabs Oxygen GVX1
comply with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interferences that
may cause undesired operation.