3DLABS Oxygen VX1 User Manual
Page 32
Configuring your Oxygen GVX1 Card for Stereo Viewing
23
3Dlabs Oxygen VX1/GVX1 User’s Guide
tab. Click DDC and check for stereo settings. If they still do not appear, click VESA
and check again. If necessary, restart your system.
11.
On the Display Properties Panel, click Test. This tests the new mode on the monitor
screen for five seconds.
12.
Click OK to test the new mode.
13.
Click OK if you saw the test bitmap correctly.
14.
In the Display Properties Control Panel, click OK. Your Oxygen GVX1 card is now
configured for stereo viewing.
This manual is related to the following products: