3DLABS Oxygen VX1 User Manual
Page 30
Configuring your Oxygen GVX1 Card for Stereo Viewing
21
3Dlabs Oxygen VX1/GVX1 User’s Guide
Configuring your Oxygen GVX1 Card for Stereo Viewing
The Oxygen GVX1 card supports 3D stereo viewing. This requires that the appropriate
equipment such as stereo glasses be connected to the 3-pin miniature DIN connector on the
Oxygen GVX1 card. It is recommended that you use a monitor with a vertical refresh
frequency of at least 100 Hertz.
In addition, it is recommended that you turn off fluorescent lighting before viewing stereo
images to prevent a possible headache.
✏
To set up and configure stereo viewing
1.
Connect the stereo hardware to the round, stereo connector at the top of the Oxygen
GVX1 card. See the documentation that came with your stereo hardware.
2.
In the Display Properties Control Panel, click the 3Dlabs tab.
3.
In the 3Dlabs Display Properties screen, click Advanced.
4.
Click the OpenGL Support tab.