Directed Electronics NAV350 - Manual (Page 22)

21
Creating a partnership
After completing the installation procedures, set up a partnership between
the NAV 350 and the computer with the help of the New Partnership setup
wizard.
Once you’ve created a partnership, you will be able to synchronize contact
information using ActiveSync. Refer to the “ Synchronizing contacts ” section
for more information.
To create a partnership:
1. If you want to upload files into an SD/MMC card for use with your NAV
350, insert the card to the device.
2. Connect the device to a computer using the bundled USB cable.
a. Plug the cable’s smaller connector to the USB port on the left
panel of the device.
b. Plug the USB client connector into an available USB port on the
computer.
The New Partnership setup wizard will automatically start on your
computer screen.
3. Follow the onscreen instructions.
4. When prompted to select the items to be synchronized, select only
ContactSync.