D-Link DES-1016D - Manual (Page 10)

DES-1016D Fast Ethernet Switch User’s Guide
2
required often make routers impractical. Today’s switches are an ideal solution for many network
congestion problems.
DES-1016D 10/100 Mbps Stand-alone Switch
General Description of Switch
The DES-1016D is a stand-alone unmanaged switch. It is equipped with sixteen ports providing
dedicated 10 or 100 Mbps bandwidth. These ports can be used for connecting PCs, servers, and
hubs. The sixteen dual speed ports use standard twisted-pair cabling and are ideal for
segmenting networks into small, connected subnets. In addition, the Switch can be uplinked to
another switch or a hub via the uplink port. Each port can support up to 200 Mbps of throughput
in full duplex mode.
Performance Features
♦ IEEE 802.3 compliant (10/100 Mbps TP ports)
♦ IEEE 802.3u compliant (10/100 Mbps TP ports)
♦ IEEE 802.3x flow control in full duplex mode (back pressure in half duplex)
♦ Auto-negotiation (NWay) between 10Mbps/100Mbps, half duplex or full duplex
♦ Full- and half-duplex for both 10Mbps and 100Mbps connections
♦ Store and forward packet switching
♦ Auto-polarity detection and correction of incorrect polarity on the 10/100Mbps TP ports
♦ Data forwarding rate 14,880 pps per port at 100% of wire-speed for 10Mbps speed
♦ Data forwarding rate 148,810 pps per port at 100% of wire-speed for 100Mbps speed
♦ Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps per port at
100% of wire-speed for 10Mbps speed
♦ Data filtering rate eliminates all error packets, runts, etc. at 148,810 pps per port at
100% of wire-speed for 100Mbps speed
♦ Support static filtering (based on MAC address)
♦ Forwarding 64 to 1522 byte frames with correct CRC checksum
♦ Layer 2 switching based on MAC address
♦ Address handling: auto-learning
♦ Aging Time: 350 ~ 700 seconds
♦ Address table: 16K
♦ Buffer size: 512K byte
Ports
♦ 16 High-performance ports for connecting to end stations, servers and hubs (MDI-X
10/100 Ethernet UTP ports and 1 MDI-II Uplink port).
♦ All ports can auto-negotiate between 10Mbps/100Mbps, half-duplex, or full duplex and
flow control.