Dometic VT 2500 - Manual (Page 7)

Changing the filter
The filter in the base station must be changed according to the number of times it has
been used, at the latest, however, after three years.
Putting out of operation
If the vehicle is not going to be used for a longer period of time, especially in the
winter months, proceed according to the following instructions:
1. After the water tank has become empty in the normal way, or the vehicle pump is
switched off and the green lamp indicating "ready" for operation illuminates, press the
pedal without allowing any water to enter.
2. Repeat this procedure a second time.
3. Then empty and clean the cassette.
4. Insert the cassette again and turn off the power supply.
5. The inlet valve for the water flushing (located underneath the pedal) must
be emptied (see Fig. below).
7
5.5
Ventil
Unscrew the lock nut and
press the pedal with the
water feed turned off.
The water escapes from the
valve.
Then screw on the lock nut
again.
5.4.1
Remove the cover
filter