Highbeam/lowbeam select switch, Flash to pass – Dodge 2009 Journey User Manual
Page 152
You can signal a lane change by moving the lever upward
or downward partially without moving beyond the de-
tent.
NOTE:
If either turn signal indicator has a very fast
flash rate, check for an inoperative outside light bulb. If
an indicator fails to light when the lever is moved, see
your authorized dealer for service.
Highbeam/Lowbeam Select Switch
Push the multifunction lever away from you to switch
the headlights to HIGH beam. Pull the Lever toward you,
to switch the headlights back to LOW beam.
Flash to Pass
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will cause the headlights to turn on at high beam and
remain on until the lever is released.
Highbeam Control
150
UNDERSTANDING THE FEATURES OF YOUR VEHICLE