Audiovox FP2000 - Manual (Page 35)

AUDIOTOX*
ELECTRONICS CORP.
Troubleshooting
Before calling our serviceman, please refer to the follow/ing chart to see if you can adjust
the problems yourself.
Blur picture or no picture
Checks and Adjustments
TV will not turn on BPIugTVin.
■ Plug something else into the outlet to make sure it is working.
■ Make sure batteries in the remote are not dead.
■ Make sure batteries are placed in the remote the right way.
■ Unplug TV for a few minutes and then turn it on again.
Poor sound or no sound ■Check volume settings and mute settings
■Check for possible interference sources
■Check antenna or TV cable
■Check for possible outside interferences
■Check picture settings
Some channels are not clear ■Check outdoor antenna and make necessary adjustments
■Check possible outside interferences
Poor Color tone or No color ■Check memory settings
■Check Color settings
■Check if program is in correct channel
■Check antenna and cable connections
■Check possible outside interferences
No reception from Cable ■Check if cable Is connected properly
■Check if channels are selected properly
■Check if cable company are experiencing technical problems
Channels above 13 cannot receive ■Check TV channel settings (CATV/TV) are set properly( page 20)
■Check antenna and UHF settings
■Check for low batteries or possible obstructions between remote and TV sensor
■Check TV main power source
■ Electric power failure
■ Preset sleep mode features are on
■TV programs ended
Unable to operate remote
TV shut off