Troubleshooting, Picture too dark, Remote control failure – Audiovox FP2000 User Manual

Page 34: Picture is blurry, Audiovox, Electronics corp

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AUDIOVOX

ELECTRONICS CORP.

Troubleshooting

Picture too dark

■ Check your brightness level

■ Check your contrast level

■ In the on screen display (OSD) select default

■ Check your LCD monitor for possible demage

I##

Remote Control Failure

■ Check TV main power source

■ Check if remote control batteries are weak

■ Check if batteries have been correctly installed

■ Check if there are obstructions between your remote control

and the main TV remote sensor

■ Disconnect your cable tor two minutes before reinstalling it

■ If failure resulted from electrical interferences, lighting or

static, disconnect the TV main powerfor 10 seconds before

reinstalling it. Restart your TV

■ Try holding remote 2 inches from sensor

Picture is blurry

■ Check other channels. Problem may be an isolated incidence

■ If using outdoor antenna, please check connections

■ Please check your accessories. Such as Video recorder,

VCD, DVD

■ Check your cable company or outdoor antenna reception

■ RF signal may be too slow

■ If all fails, please contact our sen/iceman immediately