Tv setting, Channel memory (enable/disable), Channel memory (disable channel) – Audiovox FP2000 User Manual

Page 25: Channel memory (enable channel), Audiotox, Electronics corp

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AUDIOTOX*

ELECTRONICS CORP.

TV Setting

Channel Memory (Enable/Disable)

CHANNEL MEMORY (Disable Channel)

If you do not want a particular channel, you can delete it from memory as follows:

1. From your remote, press

"CH''{A/T)

up or down to find the channel you wish to

delete. You may also directly input the channel you wish to delete.

2. Press “SKIP ON/OFF" to delete the channel you wish. This action will delete the

channnel from your TV. The deleted channel lettering will also change color from

green to red.

Red

CHANNEL MEMORY (Enable Channel)

If you wish to replace a channel, proceed as follows:

1. From your remote, press

"CH''(A/V)

up or down to locate the channel you want.

You may also directly input the channel number you wish to add.

2. Press "SKIP ON/OFF" to add the channel you want. The newly added channel

lettering will change from that of red to green.

★ Note:

1. The above enable /disable channel action may also be carried out via the menu button.

2. From Menu, select, then set the channel you wish to add or delete. Remember that the

lettering color for added channels are green and the lettering for deleted channels are red