Picture settings, Audiotox, Electronics corp – Audiovox FP2000 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AUDIOTOX
ELECTRONICS CORP.
Picture Settings
■ Picture Settings (1)
Directly Setting the brightness on the remote control, press "BRIGHT" to adjust the desired
brightness, or press MENU to select "BACKLIGHT" to odjust.
You have 3 selections to chose.
Maximum brightness
60% brightness suitable for
viewing in a well lit area
and save energy
20% brightness
■Picture Setting (2)
On the remote, press MENU. You may press on
CH(A/T)
button to scroll either up or down to
find the function you need to adjust then press left or right on the "VOL (-/+)" buttons to decide
your desired adjustments such as adjust the contrast, brightness or sharpness of the TV screen.
Action 1, Press "MENU"
BRIGHTNESS
C
50)
iMiiiiiiiiinn iiiiiiiiiiimiMi
Action 2, Press " CH "
(A/T)
CONTRAST (50)
111111111111111111111111111111111111111
s
J
Action 3, Press " VOL "(-/+)
CONTRAST (48)
iiiMiiii
III
iiiiiiiiiMiimiiM
J
When you have finished adjusting your selections, simply press the "MENU "button to exit.
Note : Under AVI AV2 AV3 TV modes, the setting are independent in each mode.
For example: In AV1 mode, the brightness setting is 100, but in AV2 or other modes, the
brightness setting may be 80, it depends on your setting in that mode.