Delta DC-580 20" PLANER 22-450 - Manual (Page 9)

9
ASSEMBLING CUTTERHEAD GUARD
Position cutterhead guard (A) Fig. 7, on top cover of
machine. Align holes in cutterhead guard (A) Fig. 7, with
holes in top cover and fasten with six M6x12mm button
head screws (B), five of which are shown.
Fig. 7
ASSEMBLING DUST HOOD
A dust hood with a 5" opening is supplied with your
machine and is to be used when connecting the planer
to a dust collector or a central dust collection system.
Position dust hood (A) Fig. 8, against the rear of the
machine and on top of cutterhead guard (B). Align the
holes and fasten the dust hood (A) Fig. 9, to the
cutterhead guard (B) using seven M6x12mm button
head screws (C), four of which are shown.
Fig. 8
Fig. 9
A B
A
B
A
C
B