Delta DC-580 20" PLANER 22-450 - Manual (Page 11)

11
Fig. 13
Fig. 14
RAISING AND LOWERING TABLE
Adjust the table height by loosening lock knob (A) Fig.
15, and rotating table adjusting handwheel (B). To raise
the table, turn handwheel (B) clockwise; to lower the
table, turn handwheel (B) counterclockwise. Tighten
lock knob (A) Fig. 15, after table height adjustment is
made. The English/Metric table height scale (C) Fig. 15,
indicates the table height setting. IMPORTANT: For best
results, setting of the table should always be made from
the bottom to the up position.
Fig. 15
A
B
C
C
A
B
OPERATION
OPERATIONAL CONTROLS AND ADJUSTMENTS
STARTING AND STOPPING THE PLANER
1. The power switch (A) Fig. 13 is located on the front of
the planer. To turn the machine on, push the “START”
button.
2. To turn the machine off, push the stop button (B).
LOCKING SWITCH IN “OFF” POSITION
IMPORTANT: When the machine is not in use, the
switch should be locked
in the off position to prevent
unauthorized use, using a padlock (C) Fig. 14 with a
3/16" diameter shackle.