beautypg.com

SoundMax SM-CDM1042 User Manual

Page 6

background image

6

Installation method B

Note: Outer trim frame, hook, and mounting sleeve are not

used for this installation.

This is only intended as a general guide; contact the

vehicle's manufacturer for specific instructions.

This method of installation uses the screw holes at the sides

of the unit and the holes of the existing vehicle mounting

bracket.

1. Align the screw holes of the mounting bracket supplied

with the car and the screw holes of the main unit. Tighten

the 2 screws on each side of the unit. Then fasten the

brackets to the car.

2. Attach wires of the unit to existing speaker wires. See

wiring diagram.