SoundMax SM-CDM1042 - Manual (Page 27)

27
USB Device Operations
The unit is equipped with a USB port on the front panel of the unit, you can insert a USB flash
memory in the USB slot.
When you insert a USB flash memory in the slot, the unit will search the MP3 files and start to play
them automatically. The unit gives priority to the latter. After inserting a disc into the disc slot while
reading the USB flash memory, the unit will play the disc. You can press MODE button on the RC or
MOD button on the unit to select USB mode.
Note:
The operations of the MP3 file in the USB flash memory is the same as the MP3 operation
described in the MP3/WMA disc part.
When reading the USB flash memory, please don't touch or take it out.
If unit can't read the USB flash memory, please check if the USB flash memory is in good
condition, or take out the USB flash memory then insert it into the USB slot once more.
The main unit can only support the standard USB flash memory.
USB MP3 player is not a standard which means different brand name or different models have
their own standard. So our product cannot support all MP3 players.
When connecting an MP3 player and there has normal battery in the player (non rechargeable
battery), you should remove the battery from the MP3 player then connect it to the USB port.
Otherwise, it may cause battery burst.
USB/SD/MMC notes
USB functions (flash memory type) MP3 music play.
SD/ MMC card support, 2in1 (SD/ MMC) support.
USB flash memory.
FAT 12/ FAT 16/ FAT 32 is possible
-
FAT 12/16 (dir: 200 support, file: 500 support),
-
FAT 32 (dir: 200 support, file: 500 support).
Filename: 32 byte/ Dir name: 32 byte.
Tag (id3tag ver2.0)