SoundMax SM-CDM1042 - Manual (Page 30)

30
Bluetooth Function
1. Pairing
1.1 Press and hold MODE button on the RC or MOD button on the unit for two seconds to access
pairing mode.
1.2 During pairing, please activate your mobile phone and input pairing code “1234” and confirm in
your mobile phone.
1.3 If pairing success, the “PAIR OK” will be visible on the LCD display. Simultaneity, the will be
flashing on the LCD display. Otherwise, it will appear “PAIR ERR”.
After pairing success, the auto-connect function needs mobile phone supporting. If your mobile
phone doesn’t support this function, please use manual-connect function to connect your mobile
phone and bluetooth.
2. Connect/disconnect
2.1 Connect
Long press BAND button, the bluetooth module will connect to mobile phone that has paired. If
connecting success, “CONT OK” will be visible on the LCD display and the will not twinkle on the
LCD display, otherwise, it will appear “NO CONT” on the LCD and will twinkle.
2.2 Disconnect
If bluetooth module has connected with your mobile phone, long press the BAND button to
disconnect with the bluetooth.
3. Dial call
3.1 Dial with the 0~9 numeric button on the phone.
3.1.1 In connect status, press the button to activate the bluetooth mode,
3.1.2 Press the "0~9" button on the unit to input telephone number. Simultaneity, the input
number will be appeared on the LCD. If a number is wrongly entered, press the
button to delete
the incorrect number.