SoundMax SM-CDM1042 - Manual (Page 18)

18
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS
service is not available in you area, the following service is not available, either.
To select a radio band
In radio mode, press the BAND button repeatedly to select a radio broadcasting band you need.
FM 1 => FM 2 => FM 3 => MW1 => MW2.
Auto/Manual tuning
Automatic search mode:
Press NEXT or PREVIOUS buttons, the automatic search will start. It will search upward or downward
for the strong signal radio station within the current band. “SEARCH” appears on the LCD display.
Manual search mode: Press NEXT or PREVIOUS buttons and hold for 2 seconds until “MANUSEEK”
appears on LCD display. Then press these buttons repeatedly to search stations manually. If you do
not press these buttons within 5 seconds, the automatic search mode will be activated and
“SEARCH’ appears on the LCD display.
To store/recall a preset radio stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 MW), manually or
automatically.
To store a station:
Select a band (if needed)
Select a station by pressing NEXT/PREVIOUS buttons.
Hold a Preset button (1-6), which you want to store the station for at least 2 seconds, the
current station is stored in the relevant preset memory bank. When a RDS station is being
stored, the relevant PI, PS, AF list is stored.
To recall a station:
Select a band (if need).