D-Link AIR DWL-610 - Manual (Page 9)

9
Please remember that D-Link Air wireless devices are pre-configured to connect
together, right out of the box, with their default settings.
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
Install the D-Link Air DWL-510 wireless PCI adapter into an available PCI slot on
your desktop computer.
(See the Quick Installation Guide included with the DWL-510.)
Install the D-Link Air DWL-610 wireless Cardbus adapter into a laptop computer.
(See the Quick Installation Guide included with the DWL-610.)
Getting Started (continued)
For a typical wireless setup at home (as shown above), please do the
following:
Setting up a Wireless Infrastructure Network
4
2
1
3
6
5
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-530TX+) to the router also.