D-Link AIR DWL-610 - Manual (Page 13)

13
Wireless Mode:
Authentication:
Keys 1-4:
Select the default key
Data Encryption:
IP Settings:
Click on the pull-down menu; select from the
following options:
Infrastructure - connecting to the WLAN
using an Access Point.(This is the default
setting).
Ad-Hoc – wireless mode used when
connecting directly to a computer equipped
with a wireless adapter in a peer-to-peer
environment.
Choose one of the following modes:
Click Apply to save changes.
When you click IP Settings in the Configuration window, the pop-up screen above will
appear. Configure the IP Settings in this window.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Using the Configuration Utility (continued)
Configuration
Select Enabled or Disabled.
IP Settings
Open Authentication – the DWL-650 is
visible to all devices on the network
Shared Authentication – allows
communication only with other devices with
identical WEP settings
WPA – Wi-Fi protected access.
WPA-PSK – Wi-Fi protected access Pre-Shared Key.
Key Length:
Select the key length and either ASCII (e.g., a word) or hexadecimal format.
SSID:
Service Set Identifier is a name that identifies a
wireless network. Access Points and wireless
devices attempting to connect to a specific WLAN
(Wireless Local Area Network) must use the same
SSID. The default setting is default.
IEEE802.1X: .
Enables or disables the use of 802.1X authentication