D-Link AIR DWL-610 - Manual (Page 11)

11
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
D-Link Air DWL-610 uses the Configuration Utility as the management software. The
utility provides the user an easy interface to change any settings related to the wireless
adapter. After you have completed the installation of the DWL-610 (refer to the Quick
Installation Guide that came with your purchase) whenever you start the computer, the
Configuration Utility starts automatically and the system tray icon is loaded in the
toolbar (see illustration below*.) Clicking on the utility icon will start the Configuration
Utility. Another way to start the Configuration Utility is to click on Start>Programs>
D-Link Air>D-Link Air Utility.
Using the Configuration Utility
If you are using Windows XP, you can use either the Zero Configuration Utility or the
D-Link Configuration Utility.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
To use the D-Link Configuration Utility with XP, right-click
on the Wireless network icon in the taskbar in the lower
right-hand corner of your computer screen.
In the window that appears, select View
Available Wireless Networks and click
the Advanced button. The screen at right
will appear.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
*Config Utility icon in
system tray
test1
test2