Leveling of range, Backguard installation, A warning – Avanti DGR-210 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION OF YOUR GAS RANGE
A WARNING®
HAVE THIS RANGE INSTALLED BY A QUALIFIED INSTALLER.
Improper
installation,
adjustment,
alteration,
services,
or
maintenance can cause injury or property damage. Consult a
qualified installer, service agency or the gas supplier.
^ Leveling of Range
The range must be level to obtain proper cooking results. The screwed leveling legs
located on the corner brackets at the bottom of range should be adjusted by turning them
clockwise to make the range higher or counter-clockwise to lower the range until the range is
level (See Figure 1). Use a level on the cookware supports to check the leveling of the range.
Backguard Installation
•
Place the backguard on top of the cook top at the rear of the range ( Figure 2)
•
Line up the holes on the backguard with the holes on cook top.
•
Fasten the backguard to cook top by using the screws, washers and nuts supplied with
the range.