AEG 730 E-m - Manual (Page 14)

Operating the
cooking zones
- beforehand
- Bolling/
frying on the
automatic hob
Without the
automatic
system
WfUithe
automatic
system
98
'
After switching on a cooking zone, you will hear me buzz. This is a
feature of my radiant heating system not inany way impair my ope­
ration !
Never place food in aluminium foil or plastip containers on my hot
cooking area, since that will have an extremely detrimental effect on
the glass-ceramic cooking surface!
You can also use my automatic hobs without the automatic system.
You should then switch me on only as far as setting 9.
When starting to fry, set the switch referringtothehobto9 until the
fat is hot. Then place thefood to be fried inthe pan andturnthe switch
back to 6 or higher as necessary.
When staitingto boil, setthe switch referring tothehobto 9,Tosim-
mer, turn the switch back to 1 to 5 as necessary.
Intermediate settings, e. g. 3 • {or * 2 only with electronic indicator),
are at all times possible.
When starting to boil within the 1-8 region (not on setting 9), my
automatic system relieves you of the need to switch overto my sim­
mering level.
Tum the knob to the right as far as it will go, to LeHer A (the rele­
vant pilot light comes on, but only if I have an electronic display).
When you let go of the knob, it will jump back to setting 9.
Then, turn the knob back to the required simmering level (1 to 8).
My automatic system selects for you the boiling-up time at the
start of cooking and then itself switches back the power corre­
sponding to the simmering setting selected.
The automatic system and/or the hob is switched off by turning to 0,
The following table shows you examples of the suitability of switch
settings 1 to 9.