Installing the battery pack, Installing the dvd player battery, Removing the battery pack – Audiovox PG300 User Manual
Page 32: Removing the dvd player battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Battery Pack:
1. First, make sure the player is in "Stop” mode and that the AC power
supply has been disconnected.
2. Close the player cover.
3. Align the battery pack with the player module’s front edge.
4. Push the battery towards the front of the player until it locks into
position. The lock position is indicated by a click. The unit will fit snugly
to the player.
5. Push the battery plug into the DVD player DC input jack.
REAR OF PLAYER
' _______________
—'
.
___________ i_
1101=0
01
P
Installing the DVD Player Battery
Removing the Battery Pack:
1. First, make sure the player is in "Stop” mode and the battery plug has
been disconnected.
2. Press the release button on the rear of battery.
3. Slide the battery towards the back of the unit.
REAR OF PLAYER
1101=0 01
Removing the DVD Player Battery
32