AEG OKO FAVORIT 3130 - Manual (Page 37)

Waiter drainage
Drain hose connection:
maximum altowable height: 1 metre;
minimum necessary height of 30 cm over iower edge of machine.
For extension hoses, which may be iaid horizontaiiy to max,. 3 m length, the
maximum ailowabie height of the drain hose connection is 85 cm.
Important notelThe drain hose must not be kinked, squashed, or twisted. Please
ensure carefui running.
Sink trap connection
The hose connection (19 mm dia.) suppiied with the dishwasher wiil fit aii
commoniy avaiiabie makes of sink trap.
The unobstructed width of the sink trap connection shbuid not be iess than
15 mm.
The drain hose must be fastened to the sink trap connection with the hose ciip
suppiied.
Water drainage into a sink
if you want to run the drain hose on a free-standing machine into a sink, you
should use the attachabie bend suppiied. Fit the bend to the drain hose.
Important note! Make sure that the drain hose does not slip off the edge of the
sink.
If you draw a string through the hole, you can also mount the bend on a wall and
thus prevent it from slipping off.
Extension hoses
Suitable extension hoses can be ordered from your specialist retailer and original
hoses from our sen/ice centre. The inside diameter of these extension hoses must
be 19 mm to prevent any loss of machine function.
77