AEG OKO FAVORIT 3130 - Manual (Page 35)

The original worktops of free-standing machines are around 2 cm depth-ad­
justable. This enables the worktop to be adjusted to adjacent applicances or
furniture.
a To make an adjustment, unscrew both screws from the worktop on the machine
back.
□ Slide the worktop forwards or backwards as required.
□ Re-insert and tighten both screws.
Free-standing machines can be installed under a continuous worktop if
the original worktop of the machine is removed.
Installing free-standing machines under a continuous worktop
□ To do this, unscrew both screws securing the worktop to the machine back,
a Push the worktop back with a slight jerk and detach.
Important: The plinth of free-standing machines is not adjustable.
To match the dishwasher to the kitchen decor, free-standing machines can be
provided with a decor panel.
Decor panels matching the kitchen decor must be ordered from the kitchen
manufacturers. A decor frame is needed for installation, if your free-standing
machine is not serially fitted with a decor frame, you can order this as a special
accessory from your specialist retailer.
Decor pane! dimensions: H 590 x В 581 mm
Clamping thickness: max. 4 mm
T Decor panel
2 Doorframe
3 Decor frame
Fig. 24
AUF1
To make sure that thin decor panels do not sag or warp, you should fix them to
the machine door with double-sided adhesive tape.
75