Before using your dishwasher for the first time, Setting the water softening system – AEG OKO FAVORIT 3130 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before using your dishwasher for the first time
To ensure protection of the. crockery baskets during transport, we have packed
them with ciamps. PiMse remove ali ciamps before operating your dishwasher.
When your new dishwasher is correctiy set up and instaiied, you must first make
it ready for use.
Before using your dishwasher for the first time, proceed as foiiows:
- set the water softener;
- fill the speciai salt container with special salt;
- fill the rinse aid dispenser with rinse aid.
The followring sections give you more detailed information on the individual points.
Setting the water softening system
Soft (low-iime) water is necessary for machine washing to avoid lime deposits on
crockery and in your dishwasher. Tap water with a hardness above 4 “d’ (German
degree) must therefore be softened for machine washing.
Forthis purpose, your dishwasher is fitted with a water softener. The water softener
is treated (regenerated) automaticaliy and at regular intervals with salt solution..
The salt consumption needed for regeneration thus depends on the local water
hardness. Your competent water company will provide you with information about
water hardness in your locality.
To ensure optimum regeneration of the water softener;
- the water softening system must be set to the local water hardness;
- the dishwasher salt container must ahways be filled with special salt.
Si
o
64