AEG LAVAMAT 6450 - Manual (Page 32)

Laundry
drum
Loading
door
Doscaling
Scroons and
controls
Frost
protoction
32
The laundry drum is made of stainless steel. Any objects left in
the iaundry and likely to rust {see the section on “Preparing the
laundry“} may leave rust stains on the drum. These stains can be
removed with a stainless steel cleaner.. Your service centre
stocks suitable products.
Remove any deposits or foreign bodies from the rubber sleeve
behind the loading door.
The loading door should not be closed after washing, so that the
laundry drum can dry out and the machine is thoroughly venti­
lated.
If you have ensured the proper detergent dosage, your machine
wiil hardly ever need to be descaled. If descaling should be nec­
essary, use only branded descaling agents with corrosion protec­
tion for washing machines. Your service centre stocks suitable
products.
The control panel and its controls should be cleaned as neces­
sary with luke-wann vrater only.
Frost damage does not come under the guaranteel
If your OKO-L^VAMAT I s installed in a room susceptible to frost,
your machirie must be subjected to emergency emptying as de­
scribed in the section of “If you think your, washing machine is not
working properly ..." if there is any imminent risk of frost.
Also, unscrew the supply hose from the water tap and allow the
water to run out. Place a cloth underneath.