To play a dvd recorded in dolby digital surround, Recording an audio source, 2 press the video 1/5.1 ch/band button – Aiwa AV-D55 User Manual
Page 13: 1 select the program source to be recorded, 3 start the selected program source
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO PLAY A DVD RECORDED IN DOLBY
DIGITAL SURROUND
This receiver has the 5.1 INPUT connectors supporting Dolby
Digital decoder with the 5.1 ch output terminals. When a DVD
player that contains a Dolby Digital decoder is connected to the
receiver, you can enjoy theater-quality audio right in your home
when playing discs recorded in Dolby Digital Surround.
1
Turn the FUNCTION selector to select the VIDEO
1/DVD/MD function.
RECORDING AN AUDIO SOURCE
(/>
z
o
c:
UJ
Q
l
o
u
(ib
<
m
TAPE MONITOR MULTI JOG
2 Press the VIDEO 1/5.1 CH/BAND button.
r;
-t.. :
■t'.'f.K'
■••"7' j*w
1 rioMi
“5.1 ch IN” appears on the display and the DVD player
connected to the 5.1 INPUT terminals is selected as a source.
3 Start playing the DVD recorded in Dolby Digital
Surround.
NOTE
• The 5.1 CH function is automatically canceled and the VIDEO
1, DVD or MD function is selected:
- when the Dolby Pro Logic is turned on
- when headphones are plugged in
• The 5.1 CH function cannot be selected while headphones are
plugged in.
1 Select the program source to be recorded.
Turn the FUNCTION selector.
2 Set the tape deck oir MD recorder to the recording
mode.
3 Start the selected program source.
To monitor recorded sound during recording (when the
connected tape deck is a three-head system)
Press the TAPE MONITOFt button. “TAPE ON” appears on the
display for four seconds, and then the source name selected in
step 1 comes back on. To cancel the tape monitor, press it again
so that “TAPE OFF” appears.
NOTE
■
Any sound control system has no effect on recording (see page
8
).
’ Input sound through the 5.1 INPUT terminals cannot be
recorded. When recording the sound from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals of the DVD
player to the VIDEO 1/DVD/MD AUDIO IN terminals of the unit.
' When recording audio sources by the MD recorder connected
to the VIDEO 1/DVD/MD AUDIO OUT terminals, the selected
video source (see page 11) should be V2 or V3. Recording
cannot be done while the VI (VIDEO 1) is selected and
displayed on the window.
■
Input sound from the tape deck connected to the TAPE
MONITOR IN terminals cannot be recorded.
ENGLISH
1 2