Connect Tech CANPRO CTIM-00043 - Manual (Page 5)

CANpro/104 User Manual
CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 5
800-426-8979 | 519-836-1291
Introduction
CANpro/104 combines the power of two independent NXP SJA1000 CAN controllers with the compact size
and rugged stability of PC/104. CANpro/104 is ideal for industrial control applications exposed to harsh
conditions or environments. CANpro/104 Opto models feature 2.5 kV of data and power isolation.
Features
● Two independent, industry standard NXP SJA1000 CAN controllers
● PC/104 compliant
● 16MHz input clock (24MHz build option available)
● Fail-safe power-up/power-down using on-board impendence transceivers to maximize nodes on the bus
and ensure glitch-free operation.
● Supports up to 1.0 Mbps operation and over 120 nodes on the bus
● 2000 V(AC) 50/60 Hz sine wave, 2500 V (peak) signal and power isolation for each port from the host
system (on CANpro/104 Opto models only)
● Jumper configurable:
● address range and interrupt sharing
● output slew rate limiting for lower radiated emissions
● -120 Ohm CAN bus termination
● Decoded address range is configurable for BasicCAN and PeliCAN modes
● Ten pin right angled header standard as an I/O connector (DB-9 option available)
● Operating temperature range of -40°C to +85°C
● +5V power output on some models
RoHS compliant