Connect Tech CANPRO CTIM-00043 - Manual (Page 12)

CANpro/104 User Manual
CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 12
800-426-8979 | 519-836-1291
CAN Controller Addressing Table
Once the Base Memory or I/O Address is setup, the 2 SJA1000 CAN controllers are accessed at the
following address offsets.
Accessed Resource
Offset from Base Address
Memory Space
I/O Space
BasicCAN mode PeliCAN mode
CAN-0 Port (SJA1000) 0x000  0x07F 0x000  0x01F 0x000  0x07F
CAN-1 Port (SJA1000) 0x080  0x0FF 0x020  0x03F 0x080  0x0FF
Memory Enable Bit At the I/O Address setup
with JB3 Positions 5,6,7
N/A N/A
Table 12
The SJA1000 Register offsets can be found in the documentation from NXP Semiconductor
(formerly Philips).
www.nxp.com (enter SJA1000 into their search tool).