Bypass selection menu 2, System operation (cont’d) – ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Operation (cont’d)
Bypass Selection Menu 2
►
◄ ?
Bypassing:
◄
►
◄
Bypass points ►
◄
►
◄
See limits
>
◄
►
◄ Quit
Bypass VVS ►
◄
9. Press
Bypass
to bypass the point displayed and to display the “unbypass”
selector button.
10. To bypass additional points, repeat steps 8 and 9.
11. Press
Quit
to display Action Menu 1.
Unbypassing Protection Points
Complete steps 1 through 7 under Bypassing Protection Points. Then perform
the following steps:
8. Press
Prev
or
Next
to display the specific point to be unbypassed.
9. Press
Unbypass
to unbypass the point displayed and to display the
“Bypass” selector button.
10. To unbypass additional points, repeat steps 8 and 9.
11. Press
Quit
to display Action Menu 1.
Bypassing/Unbypassing Vault Vibration Sensors (WS)
Vault vibration sensors are sophisticated electronic sensors that are
sensitive to occupant and construction vibrations. If construction is
scheduled to end by the programmed "Latest Close Time," use the Bypass
WS feature to automatically bypass ALL WS detectors. ALL WS
detectors will be automatically unbypassed after 12 midnight. Complete
steps 1 through 6 under Bypassing Protection Points. Then perform the
following steps:
68