ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS - Manual (Page 21)

Quick Start (cont’d)
EXERCISE: TEST
The test function is used for testing points, groups, and alarm
functions of your security system. To explore this function, enter your
ID code and enter Action Menu 2 by pressing
More at Action Menu 1.
Press Test to go to the Test Submenu. Press More to display Test
Submenu 2. Press Quit to return to Action Menu 2.
Action Menu 3
► ◄ ? Enter choice: i
► i Bypass History ► i
► ◄ Status Time ► i
► i Previous More > i
Action Menu 3 is your starting point for most time-related, power status, and
bypass functions. It has four feature selections:
• Bypass - Bypasses and unbypasses protection points, displays the
number of points within each group that can be bypassed, or bypasses
Vault Vibration Sensor points. Bypassing a point causes the system to
ignore that point until it is restored to normal operation (unbypassed).
Bypassing may be used to ignore a malfunctioning device, such as repair,
maintenance, or construction.
• Status - Checks status of AC power, standby battery power, and the
telephone line.
• History - Displays or prints the most recent 1000 system events,
including user, time, and date of the occurrence of each event.
• Time - Displays, modifies, or enters time-related functions such as
holidays, open/close schedules, daylight savings, current time/date, and
the open/close schedule in case of an ambush.
21