ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS - Manual (Page 54)

System Operation (cont’d)
Action Menu 1
◄ ? Enter choice:
◄
► ◄ Lesson Turn on ► ◄
► i See alarms Reset ► ◄
► ◄ Quit More > ◄
2. Press Turn on to display Arming Mode screen (if STAY mode is enabled).
3. Select which arming mode (AWAY or STAY).
4. Press All to turn on all Burglary groups.
5. Secure and exit premises prior to the expiration of the exit delay (if
applicable).
Turning On One or More Burglary Groups
Use this function to turn on certain groups and leave others inactive. This is
especially useful during opening and closing times. After turning off all
Burglary groups, the first person on site may wish to turn a few Burglary
groups back on before the rest of the employees arrive. For example, they
may re-activate door alarms, but leave motion detectors inactive.
Before turning on, be sure to secure (or bypass) all protection points.
1. Using the operating panel’s numeric keypad, enter a valid ID code to
display Action Menu 1.
2. Press Turn on to display Arming Mode screen (if STAY mode is enabled).
3. Select which arming mode (AWAY or STAY). The system displays the
Burglary group status.
4. Press Previous or Next to display the specific Burglary group to be
turned on.
5. Press the “Group description” button to turn on that specific group.
54