AEG 155 D User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Display

warning on

saturation

of metal

grease filter

(Fig. 15)

After 30 operating hours the letter (F- grease filters) will flash on
and off on the display (D) in alternation with the fan speed setting.

This means that the metal grease filters need to be cleaned!

(This operation should be carried out every 30 operating hours!)

Proceed as follows to remove and clean the metal filters:

Switch of the fan motor by pressing the button.

Take the precaution of removing my cartridge fuses from their
fuse holders or tripping the automatic circuit breaker to ensure the
fan motor cannot be switched on accidentally.

1. Remove the grille (Fig. 16).

— Open my latch L and swing the grille downwards.
— To remove the grille, pull it forwards from the right and

release it.

Remove the metal filter by operating the stops that fix them to the

grille.