AEG 860 D User Manual
AEG Fans
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
860 D/8609 D
Einbau-Kamin-Dunstabzugshauben
Build-In Chimney Fume Extractor
Flood
Flottes aspirantes encastrables avec
évacuation de l’air par la cheminée
Inbouwafzuigkap voor schoorsteen
Inbyggnadsfiàktar for anslutning till
skorsten
Flormirakenteiset liesituulettimet
Montage- und Gebrauchsanweisung
Instructions for Installation and Use
Instructions de montage et mode
d’emploi
Montage- en gebruiksaanwijzing
Montering och anvandning
Asennus- ja käyttöohje
This manual is related to the following products:
Table of contents
Document Outline
- For this purpose, you need the AEG Original Active Carbon Filter (see special accessories).
- Dimensions:
- 860 D
- Weight:
- 8609 D
- Weight:
- Fan outputs (settings) to DIN 44 971 860/8609 D Setting 1 Setting 2
- Exhaust air system 125 mm dia.
- Air outlet arranged centrally above
- The fume extractor hood is used as a return air hood when no ventilation shaft or outer wall is available.
- To insert the 2 carbon filters, proceed as follows:
- Exhaust air discharged upwards or backwards:
- Remove the previously available exhaust air hose!
- 6. Installing the chimney equalizer (Fig. EO/1) Hush with the ceiling
- Maximum equalization height 2.55 m
- Eiectrical connection
- Operation My sliding switches are arranged on the RH side (when viewed below from the front).
- -)S[-