Audiovox LCM5620PKG User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using

Vr\B

utility knife, cut the headrest material along

the “X'* lines. Do not cur the material along the other
lines at this time.

This Will leave you with an ‘’X’’ cut as shewn.

Pull the flaps up and cut the foam beneath the

material fo the proper depth. Cut all four sides of

the foam,

Using your fingers, tear the foam out of the
headrest leaving a recess where the shell

will be inserted.

At this point you will need to install ihe
harness up through the area Into the recess.
It may be helpful to follow one of the posts

and tie wrap it to tl'\e post for restraint.

-4-