Audiovox LCM5620PKG - Manual (Page 12)

OPERATION INSTRUCTION
1. Button Functions:
a) There are tour buttons on the front of the monitor; POWER. MENUi'ENTER.”A'’and "v".
b) POVsfER ‘ Pressing this button will turn the unit on.' off.
c) MENU/ENTER : Pressing this button. v.ili display the menu OSD. After opening the menu, it is
used as the Enter function.
d) With the menu displayed on the saeen you may then use the
a
or v buttons to select from:
Picture. Source, Audio (Master only) and Display off. When the appropriate item is highlighted
you may then press Iho enter button to access that function, then use the a or v to adjust or
switch the selected item,
NOTE: Tile above 4 buttons oro also located on the Remote Control Unit.
e) Source: This button Is only located on the remote control, and it will select between AV1 and AV
2. OSD
a) Press Ihe Menu/Enter button. OSD as below:
For using (he Master
MENU
PICTURE
SOURCE
AUDIO
DISPLAY OFF
b) Uso A or V buttons to highlight the AUDIO item, then press Menu / Enter button, OSD as below;
AUDIO
AUDIO 1
AUDIO 2
c) Use A or V buttons to select the audio for the FM Modulator (Color blue means that audio source
has been selected at Uie moment).
d) The Slave monitor cannot select the audio source, so the OSD AUDIO docs not appear in the
menu.
MENU
PICTURE
SOURCE
DISPLAY OFF
e) Select DISPLAY, then press the Mena'Enter button, this item v/ili change to "DISPLAY ON", that
means the source number selected will be displayed on the monitor until "DISPLAY OFF" Is
selected.
f) Highlight ihs SOURCE and press Menu/Enter button. OSD as below:
SOURCE
AVI
AV2
Then, you can use
a
or v buttons to select from AV1 or AV2. The Master monitor can also
operate the AV sources via the remote control sensor.
-11-