Black & Decker SR650 User Manual
Key information you should know, Shaper/router
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I H S T B U C T I O N M A N U A L
Shaper/Router
POUR LE FRANÇAIS, VOIR LA
COUVERTURE ARRIÈRE.
VEA EL ESPAÑOL EN LA
CONTRAPORTADA.
WARNING; FOR SAFE OPERATION
READ INSTRUCTION MANUAL.
IF YOU HAVE ANY QUESTIONS,
CALL US TOLL FREE:
800
762
6672
KEY INFORMATION
YOU SHOULD KNOW
Always make certain that material is fed
into the cutter rotation whether unit is
operating in forward or reverse.
Remove material from cuts in small
amounts and in multiple passes. This will
preserve both motor and cutter life and
provide the highest quality of cut. Always
use sharp cutters and bits.
Make certain that spindle and router bit
lock nuts are tightened snugly before
each use.
Document Outline
- Double Insulation
- Polarized Plugs
- Safety Instructions For All Tools
- Additional Safety Rules for the Shoper/Router
- Shaper
- Assembling Table Insert
- Bench Mounting (See Figure on Following Page)
- Operating Controls and Adjustments
- Raising and Lowering the Spindle
- Adjusting the Fence
- Clear Plostic Guard
- Wrench Storage
- Installing Router Bits
- Starting Pin
- Installing the Shaper Spindle and Shaper Cutter (Figure 19)
- Operation
- Shoping or Routing When Using the Fence as a Guide
- Shaping or Routing With Collars and Starting Pin
- Starting Pin
- Accessories
- Important
- Full Two-Year Home Use Warranty