1 press the tuner button to select a band, To clear a preset station, When using the remote controi – Aiwa AV-D25 User Manual
Page 13: 2 press the set button to store the station, 3 repeat steps 1 and 2, Presening stations, Preset number tuning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESEniNG STATIONS
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Press the TUNER button to select a band.
2 Press the numbered buttons to select a preset
number.
Example;
To select preset number 25, press 2 and 5.
To select preset number 7, press 0 and 7.
To clear a preset station
Select the preset number of the station to be cleared.Then, press
the SET button, and press the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When using the remote controi
Press the TUNER BAND button to select a band, then press the
numbered buttons to select a preset number.
PRESET NUMBER TUNING
Z
o
LU
Ü
UJ
OC
O
Q
<
OC
1 Press the TUNER button to select the band, and
press the UP A or DOWNT button to select a
station. Direct tuning is aiso avaiiable.
2 Press the SET button to store the station.
A preset number assigned to the station, beginning from 1 in
consecutive order for each band, flashes in the display for
two seconds.
>U| DANCE
ROCK
LIVE
POP
■ I I
: : :
3 Repeat steps 1 and 2.
No more stations will be stored if a total of 32 stations have
already been stored for all the bands.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGLISH
1 2