Read these instructions before use, Getting started, Aerial connection – Beko 32WLA530HID User Manual

Page 7: Switching on and first use

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Getting started

Remove your Television carefully from the box.

You may wish to store the packaging for future

In the box

Inside the carton box you should have:

• Accessories box
• Power cord
• Remote control
• Batteries
• Instruction Book

Note:

Scarf,

VGA,

PHONO

and

HDMI

Leads are not supplied.

Read these instructions before use.

Aerial connection

To connect an aerial, plug the aerial lead

into the aerial socket on the rear of the

TV.

1. The availability of Freeview digital terrestrial

services in your home depends on your local

transmitter and the configuration of your existing

reception equipment.

You should have already checked your postcode

to see if you are in a Freeview coverage area.

If not please contact Freeview immediately:

Call 08708 809980

Text your postcode to 83331

Visit www.freeview.co.uk

If you are in a Freeview coverage area but

are unable to receive all available channels for

your location, it is recommendded you have a

site survey by a professional aerial installer to

ensure aerial alignment and line of site' to the
transmitter are optimised. If you do not know of

local

aerial

installer,

please

call

the

Confederation of Aerial Industries (www.cai.org.uk)
on 0208 902 8998 who will be able to

recommend one.

You con use on outdoor or indoor aerial.

However, if you use an indoor aerial the quality

of the reception may be reduced and adjustment
of the aerial may be required when changing

programs.

Please note

If you live in a poor reception area or use an
indoor aerial you may experience loss or

corruption of teletext transmissions.

Switching on and First Use

1. Connect the mains lead to the socket at the

back panel of the LCD TV.

Connect the mains plug to a suitable mains

socket.

Note 1

: Your TV will go to stand-by mode

in five minutes if there is no broadcast signal.

Note 2:

Your TV is equiped to operate from the

control buttons on the cabinet. In case your R/C is

broken or the batteries are exhausted.

Pleose Note

When not in use disconnect the mains plug from

the mains supply.

Press the

Power

button on the cabinet

of the TV. The standby indicator will

illuminate.

Press a numeric button or the

Program

Program Down

button on the

remote handset or

Program Up /

Program Down

on the cabinet of the

TV to switch the TV on. The picture will

appear after a few seconds.

Pleose Note

Do not leave the television in standby unattended

or overnight.

Switching the TV on for the first time

To install your TV, please read the sections

"TV controls" and "Tuning the television".

The botteries

Remove the back cover to reveal the battery

compartment and make sure you insert the

batteries the right way round.

Suitable battery types for this remote are

UM4, lEC R03 or AAA 1.5V.

Do not throw your old batteries into a fire,

dispose of them in a designated disposal area.

Do not combine a used, old battery with a new

one or mix battery types.

The performance of the remote control will

deteriorate beyond a distance of 8 metres or
outside an angle of 30 degrees from the centre
of the TV.