Beko 32WLA530HID - Manual (Page 19)

VCR mode(Digital): Using this feature you
can avoid image distortions from the device or
the magnetic tape while watching. For this you
have to switch the VCR mode to ON.
1/
Digital Features w
On/OffTimer p
Menu Language p
VCR Mode Off p
Scart2 Output «1 Scarti p
Teletext 4 Auto p
Panel Lock 4 Off p
Please note: This feature is only active for the
AV inputs. This option will not be seen in Feature
menu while watching programs or in PC mode.
This feature becomes automatically active in the
"0" numbered program.When you store the "0"
numbered channel as video device aerial
output, you will be able to avoid image distortions
from the device or the magnetic tape while
watching.
PIP Usage (Picture in Picture) Feature:
I
Press the ('-^) button on your remote
control.
The screen will show the PIP window
selection menu.
Note:
1) To change a channel or source a PIP window
is displaying:
a) Select the window to change using up/down
buttons.
b) Use remote control to change channels or
source as you would in normal full screen mode.
2) You can use PIP in PC or DVI mode.
3) The same source cannot be watched with PIP
and the main image.
PIP Position
This feature enables you to position your PIP
window. For this press the (
) button, while PIP
mode is active, to bring the PIP Position menu on
screen.
Press the right/left (tl)/(ii) buttons to select the
PIP Position desired. After you have positioned
your PIP window you can exit the menu by pressing
the (vj) button on the remote control.
In this menu use (' )/($) buttons to select either
Picture in Picture (PIP) or Divided Screen (PAP)
and press the ( ) button.
According to the selection a picture will open in
main picture or two pictures side by side.
If you choose Full Screen mode PIP will be disabled.
In the event that you wish to exit PIP mode, simply
press the button and select the full screen
icon.
When PIP or PAP feature is selected you
can activate the main picture or the
secondary picture by pressing up and
down navigation buttons. The active picture
is expressed with a while border. The menu
features can be used for the active picture. With
the AV button you can choose also the sources at
the active window during PIP or PAP feature is on
PIP Size
This feature enables you to resize your
PIP window. For this press the ( )
button, while PIP mode is active, to
bring the PIP Size men^ on screen.
Press the right/left (§)/(ii) buttons to
change the PIP Size. After resizing your PIP
window you can exit the menu by pressing the
(O) button on the remote control.
PAT Mode
The pat ( picture and text.) feature is
opened by pressing the (O) button and
then pressing the ( ••) button while in the
TEXT mode. This feature ensures that both
the teletext and the channel intended to
be watched can be shown on the screen
simultaneously. To exit the pat mode, the
PIP buton is pressed.
-
19
-