Hvia aerial socket (video recorder only), Via phono lead and s-video socket, Video – Beko 32WLA530HID User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HVia aerial socket (Video recorder only)
Make sure the TV and video recorder are both
switched off.
Unplug the aerial lead form the TV and plug
it
into
the
aerial
socket
on
the
video
recorder.
Plug a coaxial plug into the RF out socket on
the rear of the video recorder and plug the
other end into the aerial socket on the TV.
Switch on the video recorder and the TV. If
your video recorder has a test signal, switch
it on. (Refer to the video recorder user guide).
Alternatively play a pre-recorded tape as a
substitute.
See 'Tuning the TV' and carry out the tuning
procedure for the video recorder test signah
Select a programme number 0.
through the
©Via PHONO lead and S-Video
socket
You
can
also
connect
S-Video socket of the TV.
it
Plug the S-Video plug into the S-Video socket
and the audio leads into the audio sockets.
VIDEO
-
24
-