To attach bag to mower, Ac warning – Bolens 126-216-000 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Attach the rear handle to bag by inserting one side
of handle into pocket on the rear of the bag. The
handle should hook toward the rear of the bag as
— shown in figure 13. Thread all the material onto one
side, then slide it over onto the other side. See
figure 13.
TO ATTACH BAG TO MOWER
▲c
WARNING t
DO NOT operate the mower with the
chute door open unless the com
plete
grass
catcher
is
properly
mounted on the mower,
1. Hold the chute door on the catcher panel open as
— shown in figure 14.
2. Slide the frame of the grass catcher down into the
channels on the catcher panel. The hooks on the
frame go over the catcher panel.
Lower Handle
of Mower
Grass C atcher-
Handle
3.
Hook the handle on the rear of the grass catcher
—over the lower handle of the mower. See figure 15.
FIGURE 15.
To remove the grass catcher, unhook the rear handle
and lift the grass catcher straight up.
To convert your mower back to a side discharge unit,
remove only the grass bag and top discharge chute,
and assemble the side chute deflector. It is not
necessary to remove the catcher panel and brackets.
Ac
WARNING
\
Never
operate
your
unit
without
either the side chute deflector or
entire
top
discharge
chute
and
catcher panel assembly in place.