Antenna placement, Connecting doorlocks – Bulldog Security 22I User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ANTENNA PLACEMENT

Run the antenna 4-pin harness up the windshield pillar on the driver's side

and across the top of the windshield tucking the antenna harness inside the

headliner, behind the rearview mirror. NOTE: Before mounting the antenna

to the windshield/ first clean the glass with an alcohol pad. Plug the

RED 4-pin harness from the antenna into the RED connector on the back

of the unit. It will perform best If mounted below the dark windshield tint.

Each receiver is tested to more than 1/4 mile of clear air reception. While

many times you will see 1/2 mile or more. Many factors will affect the range,

including the amount of radio signals in the area, battery strength, window

tint, etc.

C2003 A(c«5» 2 Communiutioft V Inc

CONNECTING DOORLOCKS

WHEN ADDING

DOORLOCK ACTUATORS

5-PIN DOORLOCK HARNESS