Beko BD-610 - Manual (Page 8)

Getting Started with Skype
You can configure your Dect phone with
an existing Skype account during the
first-time installation or you can optionally
create a new Skype account. You only
need a Skype username and password
defined by you to create a new account.
Create a New Skype Account
If you do not have a Skype account,
follow the instruction below:
1. In standby mode, press Right key to
enter Sign-in page;
2. Use Scrolling button up / down to
highlight Create new account, press Left
key to select this item;
3. Use keypad to enter the Skype name,
press Right key to clear the incorrect
character, press Left key to confirm your
input.
4. Use keypad to enter the password,
press Right key to clear the incorrect
character, press Left key to confirm the
input, you are asked to repeat the
password by entering it again.
5. You are then directed to the Skype
Agreement, use Scrolling button up /
down to read the entire text, then press
Left key to accept.
Notes:
- Press * key continuously to switch
between the input methods, abc (lower
case), ABC (uppercase), 123 (digit), Abc
m-
-
Press 1 button to input punctuation
marks when entering your Skype
account.
- Skype names can be 6 to 32
characters. You can use any mix of
upper and lower case characters,
numbers and punctuation marks. You
cannot use spaces and your name
cannot begin with a number or
punctuation mark. If the name is already
in use, you will be prompted to try
another name.
- Password can be 4 to 20 characters.
You can use any mix of upper and lower
case characters, numbers and
punctuation marks. Your password
cannot begin with a number or
punctuation mark, and it cannot be the
same as your Skype name.
- Please be patient as the creation of
your Skype account may take several
minutes to perform.
To Sign in to Skype
When you already have a Skype account,
you can sign in to Skype directly.
1. In standby mode, press Right key to
enter Sign-in page;
2. Use Scrolling button up / down to
highlight Sign in to Skype, press Left key
to select the entry;
3. Use keypad to enter the Skype name,
press Right key to clear the incorrect
character, press Left key to confirm your
input.
4. Use keypad to enter the password,
press Right key to clear the incorrect
character, press Left key to confirm the
input;
5. You are now asked whether you want
to save your Skype name and password
for automatic sign-in, press Left key to
accept. Right key to decline.
Notes;
- Skype does not allow emergency calls.
Such calls are always routed to the
landline connection. Therefore it is
important that you set the correct landline
country. Do not forget that your Dect
phone has to be connected to a power
outlet in order to work. Your Dect phone
will not function during a power failure.
- For Input methods please refer to the
notes of Create a New Skype Account.
- Please be patient as synchronization
of Skype contacts might take several
minutes.
6